ST Gases Trading Sdn Bhd
53, Jalan 5/116B,
Kuchai Entrepreneurs Park,
Jalan Kuchai Lama,
58200 Kuala Lumpur,
Malaysia.
53, Jalan 5/116B,
Kuchai Entrepreneurs Park,
Jalan Kuchai Lama,
58200 Kuala Lumpur,
Malaysia.
+603-7983 0055
+603-7980 8655
CADDY TIG 1500i or 2200i, TA33
Previous | 10 / 11 | Next |
Compact and portable inverter for TIG welding, with HF or LiftArc start, and MMA.
Features
- -Durable and impact resistant design with OKC 50 cable connectors
- -Easy to operate. All basic settings for quality TIG welding available
- -Digital display for settings
- -Plate thickness setting for TIG. Set the plate thickness and the machine will control the welding parameters
- -Adjustable slope down and gas post-flow
- -ArcPlus™ II regulator for better MMA welding characteristics. Higher weld quality with less after treatment.
- -Caddy® Tig 1500i welds most electrodes from 1,6 - 3,2 mm and some 4 mm electrodes
- -Caddy® Tig 2200i welds most electrodes from Ř 1,6 - 4 mm
- -Can operate with extra long mains cables, over 100 m.
- -IP 23 - designed for outdoor use making it safe on all work sites
Specifications
Input Ratings
Caddy Tig 1500i, TA33
Frequency Hz | 50/60 Hz |
Phases | 1 |
VAC | 230 VAC |
Caddy Tig 2200i, TA33
Frequency Hz | 50/60 Hz |
Phases | 1 |
VAC | 230 VAC |
Output Ratings
TIG
Amp High | 150 A |
Duty Cycle | 25 % |
VDC Out | 16 VDC |
Amp High | 120 A |
Duty Cycle | 60 % |
VDC Out | 14.8 VDC |
Power Specifications
Caddy Tig 1500i, TA33
Open Circuit VDC High | 72 VDC |
Power Factor Maximum Current | 0.99 % |
Setting Range MMA/DC (A) | 4-150 A |
Setting Range TIG/DC (A) | 3-150 A |
Caddy Tig 2200i, TA33
Open Circuit VAC Low | 46 VAC |
Open Circuit VDC High | 60/<35 VDC |
Power Factor Maximum Current | 0.99 % |
Setting Range MMA/DC (A) | 4-170 A |
Setting Range TIG/DC (A) | 3-220 A |
Specifications
MCableX | 3x2.5 |